Can UNS S20910 be used in hot rolled or solution annealed and hot rolled conditions?

Introduction

This page presents a question regarding the use of UNS S20910 in the hot rolled or solution annealed and hot rolled conditions, as long as the hardness does not exceed 35 HRC, for applications specified in Table A.3 of NACE MR0175/ISO 15156-3.

Answer

The provided answer confirms that this statement is correct, and the question pertains to NACE MR0175/ISO 15156-3 Table A.3.

Reference

The reference cited is ISO 15156 Maintenance Panel Inquiry #2015-06.

Conclusion

In conclusion, UNS S20910 can be used in hot rolled or solution annealed and hot rolled conditions, as long as the hardness does not exceed 35 HRC, for applications specified in Table A.3 of NACE MR0175/ISO 15156-3.